Xstream AC3030B, Operation Manual

10

General Safety Information

Do not operate unit if damaged during shipping, handling or use. Damage 

may result in bursting and cause injury or property damage.

Since the air compressor and other components (filters, lubricators, 

hoses, etc.) used, make up a high pressure pumping system, the 

following safety precautions must be observed at all times:

1.   Read all manuals included with this product carefully. Be thoroughly  

familiar with the controls and the proper use of the equipment.

2.  Follow all local electrical and safety codes

3.  Only persons well acquainted with these rules of safe operation 

should be allowed to use the compressor.

4.  Keep visitors away and NEVER allow children in the work area.

5.  Wear safety glasses and use hearing protection when operating the 

pump or unit.

6.  Do not stand on or use the pump or unit as a handhold.

7.  Before each use, inspect compressed air system and electrical   

components for signs of damage, deterioration, weakness or leakage. 

Repair or replace defective items before using.

8.  Check all fasteners at frequent intervals for proper tightness.

WARNING

Compressor parts may be hot even if the unit is 

stopped.

9.  Keep fingers away from a running compressor; fast moving and hot  

parts will cause injury and/or burns.

10.  If the equipment should start to abnormally vibrate, STOP the engine/

motor and check immediately for the cause. Vibration is generally a 

warning of trouble.

11.  To reduce fire hazard, keep engine/motor exterior free of oil, solvent, 

or excessive grease. Never remove or attempt to adjust safety valve. 

Keep safety valve free from paint and other accumulations.

WARNING

Motors, electrical equipment and controls can cause 

electrical arcs that will ignite a flammable gas or vapor. 

Never operate or repair in or near a flammable gas or 

vapor. Never store flammable liquids or gases in the 

vicinity of the compressor. 

safety