Xstream AC3030B, Operation Manual

11

WARNING

Do not spray flammable materials in vicinity of open 

flame or near ignition sources including the compressor 

unit.

12.  Never attempt to repair or modify a tank! Welding, drilling or any 

other modification will weaken the tank resulting in damage from 

rupture or explosion. Always replace worn or damaged tanks. Drain 

liquid from tank daily.

13.  Tanks rust from moisture build-up, which weakens the tank. Make 

sure to drain tank daily and inspect periodically for unsafe conditions  

such as rust formation and corrosion.

14.  Fast moving air will stir up dust and debris which may be harmful. 

Release air slowly when draining moisture or depressurizing the 

compressor system. 

Spraying Precautions

15.  Do not smoke when spraying paint, insecticides, or other flammable 

substances.

16.  Use a face mask/respirator when spraying and spray in a well        

ventilated area to prevent health and fire hazards.

17.  Do not direct paint or other sprayed material at the compressor. 

Locate compressor as far away from the spraying area as possible to 

minimize overspray accumulation on the compressor.

18.  When spraying or cleaning with solvents or toxic chemicals, follow 

the instructions provided by the chemical manufacturer.

Hose Precautions

19.  Inspect hose before use. Do not exceed working pressure marked 

on hose. Do not twist, bend knot, or abrade hose. Do not wrap hose 

around body.

20.  Keep away from hot surfaces and chemicals.

WARNING

Arcing Parts. Keep the compressor/motor at least 6m 

away from explosive vapour.

safety