DeltaDirect Quick Start Guide Page 2
DeltaDirect – Quick Start Guide
Configuration of the Remote Interface on DPA Amplifiers
To configure the remote interface, from the home screen, press MENU, choose the INTERFACE Sub-
Menu and press ENTER.
Use the encoder or BACK and NEXT keys to select External Interface and press ENTER.
Use the encoder or BACK and NEXT keys to choose the required interface and press ENTER.
For the purposes of working with the DeltaDirect app, the interface should be set to “Ethernet Only”.
This will invoke a series of further options depending on the interface chosen — these are explained
below:
Mode
= Ethernet Only
: The Ethernet control port on the rear panel is active. Selecting this
choice will then ask for the following further information to be confirmed:
RS485 Relay:
Set to OFF.
Remote ID Number:
Set a device ID (still required even on Ethernet connections).
This must be unique to the connected unit — setting the same ID on multiple units may cause
comms problems for all devices.
IP Mode:
Choose either Static or Auto IP. Auto IP will generate an IP address based on
unique hardware features such as MAC address. Choose Static if you need to select the IP
address to lie within a specific range, for instance when working within a larger
infrastructure.
GtWay:
The gateway address is used for external access to the Internet and should be
left at the default setting.
SubNt:
The subnet mask is used to subdivide IP addresses into groups that allow further
sub-groups addressing to be defined, so further extending the address range.
Leave at default 255.255.255.0 unless specifically required.
IP:
The IP address specifies the amplifier’s unique identifier on the Ethernet network. It is
used in conjunction with the amplifier’s Remote ID number to identify individual devices on
the network. Make sure this is not set to the same value as any other devices or comms
problems will occur.
INTERFACE Sub-Menu
External Interface
External Interface
Mode= Ethernet or USB
Summary of Contents for DeltaDirect for iPad
Page 1: ......