X
X
X
T
T
T
E
E
E
E
E
E
L
L
L
E
E
E
C
C
C
T
T
T
R
R
R
O
O
O
N
N
N
I
I
I
C
C
C
▫
User’s Manual
▫
4
▪
11
3. User’s liability
3.1. Damages to the loudspeakers
Always check the peak and continuous power of
the loudspeakers.
This amplifier is extremely powerful and can be
potentially dangerous both for the loudspeakers
and for the persons.
Most loudspeakers may be easily damaged or
broken. Even if there is a gain reduction through
the attenuators on the amplifier’s front panel, it is
still possible to reach the maximum output power
if the input signal level is high enough.
3.2. Dangerous output voltage
The amplifier can generate hazardous output
voltage. Do not touch exposed cables of
loudspeakers with the amplifier in operation.
3.3 Radio interferences
A sample of this product has been tested and
approved to meet the requirements of the
Electromagnetic Compatibility Directive (EMC).
These requirements have been defined so as to
provide reasonable protection against dangerous
interference of electrical equipment. Whenever
this product has not been installed or handled
according to these guidelines, it might interfere
with other equipment such as radio receivers.
However, there is no guarantee that they should
not occur in a specific installation. Should this
equipment interfere with transceiver equipment
(such possibility can be checked by switching on
and off the device), the user should try to cancel
the interference by observing one or more of the
following measures:
Increase the distance between the device and
the receiver.
Connect the device to a plug linked to a
different circuit with respect to the one to
which the receiver is connected.
Redirect or move the receiver’s antenna.
Make sure that the unit concerned conforms
to the EMC immunity limits (CE-labelled). All
electrical equipment sold in the EC should be
approved as for what concerns protection
against electromagnetic fields, high tension
and radio interference.
Contact qualified personnel.
4. Introduction
Congratulations on choosing XTE device and
thanks for trusting us and our products. Your
device has been carefully planned in the smallest
details, starting with every part of its equipment till
final assemblage. All products XTE are made with
the main purpose of guaranteeing our clients’ full
satisfaction, thus we underline that the product
you have chosen uses the most advanced
technology.
An improper use of the device can compromise its
correct operation. Therefore we recommend you
to carefully and correctly use it.
Read this manual carefully as it contains essential
information for a safe use of your device.
4.1. Unpacking
Immediately inspect the package and its content
so as to check whether there are any signs of
damage. After unpacking check the product and
all parts, if you notice any damage inform your
dealer immediately.
It is advisable to save the packaging materials
even if the amplifier shows no sign of shipping
damage; you might have to return it to XTE or to
one of its dealers. Use the original package only,
which is the best way to protect the equipment
from shipping mishandling.
4.2. Assembly
Metal framing of all the XTE products is suitable to
be supported on a surface (table, etc.) and is
equipped with separated stirrups for assembly in
19” rack standard.
Pay particular attention during the installation; we
remind you that the devices should not be
installed in places with:
High
temperatures
Dust and excessive humidity
Presence of intense magnetic fields
Water next to the component
Vibrations
Closed spaces inhibiting a proper ventilation
