Technical specifications
Device
Type
Maximum power output (RMS)
Frequency response
Signal- to-noise ratio
DC input
Buttons
Bluetooth
®
V5.0 earphones
35mW
20Hz
〜
20kHz
90dB
5VDC, 130mA
3 buttons: Next song, Volume up; :Turn
On/Off, Play/Pause, Answer/hang up call, reject
call/ Redial the last number; : Previous
song, Volume down
8. If pairing is successful, the LED indicator will flash slowly in blue and an
audible tone will be heard. If after 60 seconds the pairing process fails,
please turn off the earphones and repeat steps 1 through 6 described
above.
Using the wireless earphones
1. Answering and ending a call using your mobile phone
• When there is an incoming call, briefly press the multifunction button
once to pick it up. You may also press the answer button on your cellular
phone to take the call.
• To end a call, simply press the multifunction button once again.
Likewise, you may also finish the call directly using the end key on your
cell phone.
• To reject or ignore an incoming call, press and hold the multifunction
button.
• If you want to redial the last number called, press the multifunction
button twice while the headset is in standby mode.
2. Music playback
• Briefly press the multifunction button to play and pause audio
playback.
• Briefly press the button to increase the volume level. Press and hold
to choose next track.
• Briefly press the button to decrease volume level. Press and hold to
play the previous track.
• When listening to music using your smartphone, playback will pause to
allow the call to go through.
• As soon as you hang up, music playback will resume automatically.
Note: Loss of audio on either left or right side of the headset can be
caused by built-up dirt or wax. See Cleaning and maintenance
instructions on page 7 for reference.
