-9-
Setting Camera N/P Standard
Setting Prompt Voice
The standard of the camera can be adjusted at any time, that means the quality of image on
screen can be set to differ.
P standard is default, to change the setting, please follow the steps:
Max. 9-languages voice to select,
No voice
,
Voice 1
and
Voice 2 ...
Voice 1
is default, to change the setting, please follow the steps:
UNLOCK Indicator:OFF
CALL Indicator:ON
Buzzer
Beep+, Beep
In standby mode, press
KEY_SET
button twice.
UNLOCK Indicator:OFF
CALL Indicator:ON
Buzzer
Beep+
Press
KEY_2
button to set the
camera standard to
P
standard.
UNLOCK Indicator:OFF
CALL Indicator:ON
Buzzer
Beep, Beep
Press
KEY_2
button again
to set the camera standard
to
N
standard.
Press
KEY_2
UNLOCK Indicator:OFF
CALL Indicator:ON
Buzzer
Beep+, Beep
In standby mode, press
KEY_SET
button twice.
UNLOCK Indicator:OFF
CALL Indicator:ON
Buzzer
Play the voice 1
Press
KEY_3
button to set the
prompt voice to
Voice 1
.
UNLOCK Indicator:OFF
CALL Indicator:ON
Buzzer
Play the voice 2
Press
KEY_3
button again
to set the prompt voice to
Voice 2
.
Beep+
UNLOCK Indicator:OFF
CALL Indicator:ON
Buzzer
Press
KEY_3
button again
and again to set the prompt
voice to
No voice
.
Press
KEY_3
SETUP INSTRUCTIONS
•
If setting mode has not been exited, you can change the camera standard by pressing KEY2 circularly.
•
The
LED_NAME
indicator will blink all the time until exit out the setting mode.
•
If without any operation in 10 seconds, it will exit out setting mode automatically.
•
In this step,press
KEY_SET
button three times to exit out the setting mode manually.
•
If setting mode has not been exited, you can change the prompt voice by pressing KEY3 circularly.
•
The
LED_NAME
indicator will blink all the time until exit out the setting mode.
•
If without any operation in 10 seconds, it will exit out setting mode automatically.
•
The voice can be customized.
