19
3.3
HDD Installation
You can refer to the Appendix for recommended HDD brand.
Please follow the instructions below to install hard disk.
3.3.1 2U series
This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.
1. Loosen the screws of the
upper cover.
2. Remove the HDD upper
bracket
3.
Now you can see the bottom
bracket
4. Line up the HDD to the
four
holes
of
the
HDD
bracket.
5.
Use screws to fix HDD.
6.
Install the upper bracket and then
Use screws to fix HDD in the
bracket.
7. Unfasten the HDD power cable. 8. Insert the HDD power cable. 9.Connect SATA cables.
.
Important:
If the HDD amount is less than four, you do not need to install the HDD bracket.
When there is a bracket, please make sure the installation direction of HDDs is the same.
Summary of Contents for H PG series
