background image

Matrix1608A User's guide  

 

www.xtendlan.com 

Press “EXIT” key to exit to the main Menu.

 

 

4.2.1

 

Keyboard ID No Set  

Press”Enter” key on keyboard screen “Keyboard setup” until LCD displays: 

 

 

 

 

Input the number 0(must be zero), press “Enter” key for confirmation. New ID will be in effect immediately. 

Note:  ID:00 Main Control Keyboard

6

 

4.2.2

 

Keyboard Baud Rate Set 

 

Press “MPX” or “Auto” key until LCD displays: 

 

 

 

 

Optional baud rate: 9600(must be 9600) Default baud rate: 9600bps. 

Input your required baud rate in DATA area, and press “Enter” key for confirmation. New baud rate is in 

effect immediately. 

 

4.2.3

 

Key-press Sound Set 

Press “MPX” or “Auto” key until LCD displays: 

 

 

 

 

Press < SHIFT+MON > key showing “ON”; turns on the sound function. Press “Enter” key for confirmation. 

Press< SHIFT+CAM > key showing “OFF”; turns off the sound function. Press “Enter” key for confirmation.The 

normal sound status is open.

 

 

4.2.4

 

Matching Resistance (150Ω) Set 

Press “MPX” or “Auto” key three times until LCD displays: 

 

 

 

Press< SHIFT+MON > key showing “ON”, this will place suited resistance between RS485 D+ and D-, 

Press< SHIFT+CAM > key showing “OFF”, this will separate suited resistance from RS485 D+ and D-,  

Press “Enter” key for confirmation. The normal status is open.

 

 

4.2.5

 

Keyboard Protocol Set 

Press “MPX” or “Auto” key four times until LCD displays: 

  

 

 

Press “1” key showing “Vinet” protocol, press “Enter” key for confirmation. 

Note:must be “Vinet”

 

  Current keyboard ID No.

 

 

  Input New ID No. 

1.Cur.Keyboard ID:XX 
0=Mast,1→16=Slave:XX

 

Current baud rate. 

Input new baud rate 

2.Cur.Baud Rate:XXXX 

12/24/48/9600:XXXX

 

Displays current set 

Select Sound preference 

3.Current sound: ON 

Your select:

 

Displays the current set 

4.Match resister:ON 

Your select:ON

 

Displays the current set 

5.Protocol:Vinet 
New Protocol:

 

Summary of Contents for MATRIX1608A

























Reviews: