Installation and Operation Manual
23
The target cursor line is initially positioned in the first row of
targets. Active targets are circled. Inactive targets are not circled.
Targets can be turned on or off individually, by row or by screen.
Use the following front panel buttons to set up the targets:
up arrow – moves the target cursor up one row at a time.
down arrow – moves the target cursor down one row at a time.
left arrow – moves the target cursor to the left.
right arrow – moves the target cursor to the right.
.
live – turns
ON
all targets on the cursor line.
tape – turns
OFF
all targets on the cursor line.
seq (sequence) – turns
ON
all targets.
select – turns
OFF
all targets.
camera – toggles the corresponding target on the cursor line.
function – saves current motion target setting and returns to the
Camera Titles menu.
Using the buttons above, define those areas of the picture in which
motion is to be detected. See
Video Motion Detection
for a detailed
description of the MUX-1602C motion detection feature.
The motion bar appears at the top center of the motion setup
screen. It is visible only when the MUX-1602C detects motion
and can
be used to verify detection of activity in a specific area.
When finished, press
function to save the target setting and return
to the Camera Titles menu.
Menu 7 — Security Lock
Menu 7 controls the MUX-1602C front panel security lock
feature.
When this feature is on, the MUX-1602C locks all front
panel buttons
except those required to reenter the setup mode.
Press the
up
or
down arrow
to change this option. The new
security lock setting
takes effect when you exit the setup system.
When finished, press
zoom or
fzoom to save all changes
and leave the setup system.
