- 19
–
7)
Port: Input the SMTP server port.
3.3.4.4 Alarm&Exception
[Alarm Input]
Setup alarm input.
1)
Alarm Schedule: Set the time intervals of alarm.
2)
Llinkage: Select the way of linkage. PTZ linkage: select the channel
number and the action for linkage (preset, patrol, pattern) to the
specified point and click ok.
3)
Copy: Copy the configuration to the other channels.
[Alarm Output ]
Setup alarm output.
1)
Alarm Schedule: Set the time intervals of alarm.
2)
Llinkage: Select the way of linkage.
[Exception]
Setup abnormality.
1)
HDD Full: When there is no space in the HDD, it can trigger
corresponding linkage type.
2)
Disk Fault: When there is HDD read and write fault alarm, it can trigger
corresponding linkage type.
3)
Network Broken: When there is network broken alarm, it can trigger
corresponding linkage type.
4)
IP Address Conflict: When there is network IP conflict alarm, it can
trigger corresponding linkage type.
5)
Illegal Access: When there is illegal access alarm, it can trigger
corresponding linkage type.
6)
Video Output Standard Mismatch: When the input and output format do
not match the setting format, it can trigger corresponding linkage type.
7)
Video Signal Exception: When there is video signal abnormality, it can
trigger corresponding linkage type.
3.3.4.5 Account Parameters
[Account Setting]
You can add user, modify user, set user authority, delete
user.
1)
Add User: You can set user name, password ,confirm password, user
type and bind the IP address.
2)
Modify User: You can modify the user name, password, confirm
password, user type and bind the IP address.
