3.1. PTDX5311/9211 Development Note
<Primary /Secondary IDE: Master or Slave>
Micro SD: Primary Master
CF Slot: Secondary IDE: Master or Slave (User can use slide switch (in side of CF
slot) to adjust Master or Slave
<Linux installation note>
Please forced the IDE settin g in BIOS to PIO mode before install Linux
on PTDX5311/9211 as follows:
1-Go to the advanced BIOS setting and make the “Onboard IDE Operate Mode” is
“Legacy Mode”
2-Go to the PCI/PnP and make the “ PCI IDE BusMaster” is
“Disable"
< XP professional /Home /Embedded and Windows 2000 installation note >
1-Please visit Vortex86DX CPU website to get more information:
ftp://ftp.asm.cz/XtendLan/RB_TC-261DX_261HDX_261LDX_262DX_DXM/Manual/RB_TC_26xDX_MX_Debian_5.pdf
2-Go to the Advanced and make "Onboard IDE operate Mode"
"Native mode"
3-If your CF Card support UDMA2/4, pleas e Go to the PCI PnP and make the “ PCI
IDE BusMaster” is
“Enable”
<Enhance CF to run the UDMA2/4>
1-Make sure the CF Card is supporting UDMA 2/4 Mode or not.
2-Go to the PCI/PnP and make the “ PCI IDE BusMaster” is “ Enable”
<How to boot up from the Micro SD card>
1-Get into the BIOS setup Utility
2-Go to the Advanced
3-Choose Primary IDE Pin Select: SD card
4-Press “ F10” to save configur ation changes and exit setup
Summary of Contents for PTDX5311
