TC Administrator Guide
15
Figure 5-1: The Network Tool Screen
Add X IP Access - This is basically the xhost program as seen in Linux to allow the TC to add the
IP of remote xhost for sending the X screen to this TC computer.
Ping – This tool can be used when the administrator has configured the local NIC and IP settings
but still wishes to make sure the networking are working.
Trace Route – Enter the IP to
print the route packets take to network host.
SSH – This is a program for secure encrypted logging into a remote machine and for
executing commands on a remote machine.
Telnet – This icon when clicked will communicate with another host using the TELNET protocol.
5.4 Hardware Report
The section describes If after every effort has been used, and your PC just cannot work properly
for the hardware or driver reason is in doubt, then you may need to provide the hardware report if
ask for technical support from us.
What you need to do is to click
Start
→
Settings
→
Hardware Report
→
Save Report to
→
Floppy
Disk or USB Disk.
Please follow the instructions as provided by this operation to get the end resulting file. The
resulting file is text file called report.txt. And please change it to other proper name for your
reference purpose.
