19
Notice:
Insert CDMA/EVDO UIM card for EVDO edition; and
the GSM/WCDMA SIM card for WCDMA, Please insert the
corresponding card for different mode to keep the phone
function.
9. Battery Usage
Install battery
Firstly, unscrewed the two screws, remove the battery
cover;
Insert the battery and make the battery metal sheet well
connected with the contact point, and then press the lower
end of the battery.
When remove the battery, pull the scotch tape on the
battery upward, the battery can be removed easily.
Then cover the battery cover and tighten the screw with
corn or screwdriver at clockwise. The installation is finished.
Please make sure the installation of battery is right before
start the equipment.
■
Notice:
Please close the tester before removing the
battery.
■
Please follow the above procedures.
■
Please tighten the screws for the battery cover, in case
the battery fall out when the equipment is dropped.
Battery performance
The standby time will be affected by system
