XtendLan G.SHDSL.bis Router XL-GRT402S, XL-GRT404S, User Manual
bridge interface supports discarding of frames whose VLAN classification does
not include that interface in its member set.
10. Filter Age is the time (in seconds) after which MAC addresses are removed
from the filter table when there has been no activity. The time may be an integer
value between 10 and 100,000 seconds. The default value is 300 seconds. If to
change the filter age, input the seconds desired in the filter age field, and then
clock on
Set Value
to submit your setting.
11. Traffic Class setting which is the status of traffic class mapping. If to set traffic
class, select your option from the drop-down list and click on
Set Status
to submit
your setting. The following table gives the range of values for each option which
can be specified with this command and a default value.
Option
Description
Default
value
enable
Enable the mapping of regenerated priority to its traffic
class.
disable
Disable the mapping of regenerated disable priority to its
traffic class.
prioritybased Traffic class mapping would happen only if traffic class has
not been already set.
disable
VLAN configuration
Following figure displays the VLAN settings for the bridge.
The following VLAN information is displayed:
1. VLAN version: IEEE 802.1q version number that this device supports, which is 1.
2. Max VLAN Id: The maximum VLAN Id for a VLAN in the bridge.
3. Max VLANs: The maximum number of VLANs supported in the bridge.
4. Current VLANs: The number of VLANs that are currently existing in the bridge.
Spanning bridge configuration
Following figure displays the spanning bridge settings for the bridge.
-46-
