1
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings
: Serious injury or death may cause if any of the warnings is neglected.
Cautions
: Injury or equipment damage may cause if any of the cautions is neglected.
Warnings
Follow these safeguards to prevent
serious injury or death.
Cautions
Follow these precaut ions to prevent
potential injury or material damage.
Warnings
1. In the use of the product, you must be strict compliance with the electrical safety regulations of the
nation and r egion.
2. Input voltage should meet both the SELV(Safety Extra Low Voltage) and the Limited Power Source
with AC 24V or DC 12V according to the IEC60950
－
1 standard. Please refer to technical specifications
for more details.
3. Do not connect several devices to one power adapter as adapter overload may cause over- heat or fire
hazard.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the prod uct is installed o n wall or ceiling, the device shall be firmly fixed.
6. If smoke, odor or no ise rise from the device, turn off the po wer at once and unplug the po wer cable, and
then please contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. (We shall not assume any respo nsibility for problems
caused by unauthorized repair or maintenance.)
Notice
：
1. Make sure the power supply voltage is correct before using the camera.
