32
Chapter3 Parameters Configuration
There are several network parameters of the camera those need to be set after the hardware
installation. Those parameters including IP address, subnet mask and port number, etc. which can be set
through various kinds of methods, 2 of them are introduced as below.
1. Set the camera parameters such as IP address and PPPOE through IE.
2. Set the camera parameters through the client software.
Please make sure that the PC and network camera are connected and can ping successfully before the
parameter setting. 2 different ways of connections are showed as Fig. 3.1 & Fig. 3.2.
Fig.3.1 Direct Line Connection
Fig.3.2 Cross Line Connection
3.1 Set Parameters through IE
The default IP of the camera is 192.0.0.64 with 8000 as the default port, admin as the administrator,
and 12345 as the password. The administrator can create up to 15 separate operators with different right
levels.
To login the camera through IE, inp ut the IP address in the address column, and the “Login” dialog
box will pop-up as Fig. 3.3. Input your user name and password, and then click “Login” to enter the
“pr eview” pa ge. Double click the “Camera 01” channel or “Preview” button to view the menu as Figure
3.4. Right click the “Camera 01” channel, and the “Main Stream”
、
“Sub Stream” and “Open sound”
options will popup. Select the Open sound option.
