IP Power Manager XL-IPM401 User’s Guide
14
www.xtendlan.com
2.5.2.4
Setup up own outlet default status :
When regain power , each outlet will set as appointed default status.
2.5.2.5
Internal Clock Settings & Network Time Protocol (NTP):
* User can enter the internal clock settings : year , month, day , hour , minutes and second.
* NTP function: customer can synchronize the time of XL-IPM401 to the Internet web address time .
Note: To work NTP, please do set up in e-mail and have to receive e-mail from XL-IPM401.
2.5.2.6
Wake on Lan (WOL):
Remote Wake up PC by MAC address in Ethernet ( LAN ). Use Network port (RJ45), you can wake PC on
WAN by PC `s MAC address.
Wake On LAN (WOL) premise:
1. The main board needs to support “WOL “ function. There must be a port to connect to your network card.
If your Main board support WOL,you can enable this function in BIOS setting, you could find this function in
Power Management of BIOS setting.
