NAS System
User Manual
89
3.3.3 Miscellaneous (Time and Serial Port)
The system time, date, time zone, NTP option, and Serial ports can be configured here.
Time
To set Time, press up/down arrow in the hour and seconds boxes. To set Date, click the
calendar icon on the right side and select the preferred date. To set Time Zone, click the
down arrow and select the preferred time zone.
NTP Option
To select the NTP server, click the down arrow and select the preferred NTP server.
To immediately synchronize the system time from NTP server, press the “Update Now”
button. To enable automatic update of system time from NTP server, check the “Auto
Update” option.
Update Now –
Use this button to manually update the system time and
synchronize from NTP server.
Auto Update
– Check this option to enable automatic update of system time
from NTP server.
Add
– Use this button to add an NTP server. Enter the NTP server IP address
in the box provided then click this button.
Remove
– Use this button to remove an NTP server. Select the NTP server
from the list then click this button.
Reset –
Use this button to undo or clear any changes made. (Reset button is
located in Serial Port screen)
Apply –
Use this button to save the changes made. (Apply button is located
in Serial Port screen)
Summary of Contents for XL-NAS-2800SS
Page 1: ...XL NAS 2800SS 2U 8bays SAS SATA NAS System User Manual Revision 1 0 ...
Page 36: ...NAS System User Manual 36 4 The new Volume will be created ...
Page 50: ...NAS System User Manual 50 7 Click Save when done Then Share Folder will be created ...
Page 102: ...NAS System User Manual 102 dmesg Use this button to display NAS boot up messages ...
