-
12 -
IP Address
Note: When assigning IP Addresses to the computers on the network, remember
to have the IP address for each computer set on the same subnet mask. If your
Broadband Router use DHCP technology, however, it won’t be necessary for you
to assign Static IP Address for your computer.
1. To configure a dynamic IP address (i.e. if your broadband Router has the DHCP
technology), check the
Obtain an IP Address Automatically
option.
2. To configure a fixed IP address (if you broadband Router is not DHCP
supported, or when you need to assign a static IP address), check the
Use the
following IP address
option. Then, enter an IP address into the empty field, for
example, enter
192.168.1.1
in the IP address field, and
255.255.255.0
for the
Subnet Mask.
