CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada
©
2012
9
TREADMILL OPERATION
Your treadmill features a walking belt coated with a lubricant.
IMPORTANT: Never apply silicone spray or other substances to the walking belt or
walking board. Such substances will deteriorate the walking belt and cause excessive
wear.
How to plug in the power cord.
GROUNDING INSTRUCTIONS.
This product must be grounded. No plug adapter
should be used with this product.
▲
WARNING:
Improper connection of the
equipment grounding conductor can result in a
risk of an electric shock. Check with a qualified
electrician if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product, if it will not fit
the outlet; have a proper outlet installed by a
qualified electrician. The use of an extension
cord with this product is not recommended. If an
extension cord is needed, use a short (less than
10 feet) heavy gauge (14 gauge or better)
extension cord with a three prong (grounded)
plug and receptacle. IMPORTANT: If the
power cord is damaged, it must be replaced with
a manufacturer recommended power cord.
1.
Plug the indicated end of the power
cord into the socket of the treadmill.
See drawing below.
2.
Plug the power cord into an
appropriate outlet that is properly
installed and gounded. See drawing
below. Important: The treadmill is not compatible with GFCI-equipped
outlets.
Note: Your power cord and outlet may appear different
