Customer Service 1-888-707-1880
Maurice Pincoffs Canada Inc.
©2010
9
STEP 2: Swing Arms
1. Install the two halves of the console mast cover (63 & 64) with the six 3.5 X 12mm sheet
metal screws (98).
2. Install the wave washers (121) onto the swing arm axles. Slide the swing arms (4 Left, 5
Right) onto the axles and secure with the two 5/16” X 15mm bolts (85) and 5/16” flat
washers (116).
Do not force the swing arms onto the axle. They should slide on,
but you may need to jiggle them to get them lined up properly. The swing arms
have been previously installed at the factory so they do fit properly.