Customer Service 1-888-707-1880
Maurice Pincoffs Canada Inc.
©2010
10
STEP 3: Connecting Arms
1. Remove the tie that holds the spacer (17) in the rod end located at the end of the right
connecting arm (8) and line up the rod end with the bracket at the bottom of the right
swing arm (5). Install the 5/16” X 1-1/4” bolt (86) through the bracket of the swing arm
and then through the rod end. Install the 5/16” flat washer (116) and 5/16” nut (107) on
the bolt and tighten as much as possible. Repeat this step for the left side.