Customer Service 1-888-707-1880
Maurice Pincoffs Canada Inc.
©2010
11
STEP 4: Beauty Covers
1. Install the two wheel covers (77) with four M5 X 15mm screws (97).
2. Install the stabilizer covers (78 & 79) with four M5 X 15mm screws (97). Look at the
picture below to make sure which cover goes where; there are two different covers.
3. Install the four covers (75 & 76 X 2 each side) at the bottom of the swing arms with the
two 3.5mm X 12mm sheet metal screws (98) and four M5 X 15mm screws (97).
4. Install the swing arm end cap covers (71, 72, 73, 74) with the six 3.5mm X 12mm sheet
metal screws (98). Each cover has a number sticker that corresponds to the number on
the drawing below.