Xterra FB160, Owner'S Manual

10

FB

160

 Folding Bike

KEY FUNCTIONS

BUTTONS

MODE

 - Push down for selecting functions.

SET

   - To Set the consumer movement of time, distance, calories and hand pulse.

RESET

 -For resetting consumer movement of time, distance, calories and hand pulse.

FUNCTIONS AND OPERATIONS      

SCAN

: Press the MODE button until SCAN appears, the monitor will rotate through the 6 

functions: time, speed, distance, calorie, odometer, and pulse. Each display will be held 6 

seconds. 

TIME

: Shows your elapsed workout time. Press the MODE button until “TIME” appears, press 

SET button to set target time. 

SPEED

: Display current speed. 

DISTANCE

: Count the distance from exercise start to end. The maximum value is 999.99 

miles. Press the MODE button until “DISTANCE” appears, press SET button to set target 

distance. 

CALORIE

: Count the total calories from exercise start to end. Press the MODE button until 

“CALORIE” appears, press SET button to set target calories.

ODOMETER

: Monitor will display the total accumulated distance. 

PULSE RATE:

 Press the MODE button until “PULSE” appears. Press SET button to set 

target heart rate. The heart rate range can be set anywhere from 40 - 240 BPM. 
Before measuring your pulse rate, please place your palms of the hands on both of the 

contact pads. The monitor will show your current heart rate in beats per minute(BPM) on the 

LCD after 6~7 seconds.
During the process of pulse measurement, the measurement value may be higher than 

the actual pulse rate during the first 2~3 seconds of reading, after which it will stabilize and 

display a more accurate reading. The heart rate measurement value is not intended to be and 

should not be used as the basis for medical treatment. 

NOTE
•  If the display is faint or shows no figures, please replace the batteries.
•  The monitor will automatically shut off if there is no signal received after 4 minutes.