6
FS3.5 Elliptical
#80
. 5/16” x 15mm
Button Head Socket
Bolt (6 pcs)
#84
. M5 x 10mm
Phillips Head Screw
(4 pcs)
#105
. 5/16” x 23 x 1.5T
Flat Washer (4 pcs)
#113
. 5/16” x 23 x 1.5T
Curved Washer
(2 pcs)
Console Mast Assembly
2
Hardware Step 2
1. Use cable tie to guide the 1150m/m Computer Cable (
36
) through
Console Mast (
11
) and then pull out of the console holding plate, and
Insert the console mast into main frame and secure with six Button Head
Socket Bolts (
80
), six Split Washers (
111
), four Flat Washers (
105
) and
two Curved Washers (
113
) by using Combination M5 Allen Wrench &
Phillips Head Screw Driver (
118
) .
2. Take off the cable tie which ties the Computer Cable (
36
) and plug in
the connectors of the Computer cable and the two Handpulse W/Cable
Assemblies (
40
) on the Console. Secure the Console on the Console
Assembly (
35
) four Phillips Head Screws (
84
) by using Combination M5
Allen Wrench & Phillips Head Screw Driver(
118
). Pay attention to Avoid-
ing scratching the cables.
