8
FS400 Elliptical
#147
. Ø8.5 x Ø26 x
2.0T Flat Washer (2
pcs)
#151
. 5/16” x UNC18 x
15 Button Head Socket
Bolt (2 pcs)
2
Hardware Step 2
1. Put Lower Handle Bars (L) and (R), (
4
) and (
5
), at each side of Console
Mast shaft and secure with two Button Head Socket Bolts (
151
) and two
Washers (
147
) by using Combination M5 Allen Wrench & Phillips Head
Screw Driver (
108
).
2. Release and take apart Pedal Axle (
17
) on left Pedal Arm (
2
) and install
left Connecting Arm (
7
) onto left Pedal Arm. Tighten the screw together
with the previously released Pedal Axle with 12/ 14mm wrench (
111
).
Repeat the same procedure again for the right Connecting Arm (
8
) and
Pedal Arm (
3
).
3. Release rod end shafts (
16
) which are on left and right connecting
arms(7.8). Connect the left and right connecting arm(
7.8
) with left and
right lower handle bar(
4.5
) and secure with rod end shafts (
16
) and the
screw by using 12/14mm_Wrench (
111
).
Lower Swing Arms
Summary of Contents for FS400
Page 9: ...FS400 Elliptical 7 Console Mast Front Stabilizer 1 ...
Page 23: ......
