background image

MB8.5 Indoor Cycle

1

Record Your Serial Number

Please record the Serial Number of this fitness product 

in the space provided below.

Serial Number

Register Your Purchase

The self-addressed product registration card must be completed in full and returned to 

XTERRA Fitness

. You can also go to 

www.xterrafitness.com/warrantyreg.html

  

to register online.

Thank you for your purchase of this quality indoor cycle. Your new indoor cycle has been 

manufactured by one of the leading fitness manufacturers in the world and is backed by one 

of the most comprehensive warranties available. 

XTERRA Fitness

 will do all we can to make 

your ownership experience as pleasant as possible for many years to come.

If you have any questions about your new product or questions about the warranty contact  

XTERRA Fitness

 at 

1-800-258-8511

. If you have a technical problem with your new indoor 

cycle contact 

XTERRA Fitness

 technical service at 

800-258-8511

.

Please take a moment at this time to record below the name of the dealer, their telephone 

number, and the date of purchase for easy contact in the future. We appreciate your  

confidence in 

XTERRA Fitness

 and we will always remember that you are the reason that we 

are in business. Please complete and mail your registration card today and enjoy your new 

indoor cycle.

Yours in Health,

XTERRA Fitness

Congratulations On Your New Indoor Cycle and Welcome to the XTERRA Fitness Family!

Product Registration

MB8.5_20130605

 

Purchase Location
Purchase Date

Summary of Contents for MB8.5





















Reviews: