Customer Service 1-888-707-1880
Dyaco Canada Inc. 2019
Email: customerservice@dyaco.ca
13
HOW TO USE THE SAFETY KEY
1. Place the safety key into position on the square metal portion of the console control head.
Your treadmill will not start and operate without this. Removing the safety key also secures the
treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power.
Note:
The
safety key has strong enough power to minimize accidental, unexpected stopping. The clip
should be attached securely to make certain it does not come off. The treadmill will stop,
depending on speed, with a one to two step coast anytime the safety key is pulled off the
console. Use the red Stop/Pause switch in normal operation.
TO OPERATE TREADMILL
CAUTION
: To avoid injury, hold onto the handrails while mounting and dismounting
the treadmill. Hold onto the handrails and place feet on side rails before starting. Step onto the
walking belt only a slowest speed. Always hold on to a handrail or hand bar while making control
changes (incline, speed, etc.). Before operating the console make sure that the power cord is
properly plugged in and the on/off button is on. Attach the magnet end of the safety key onto the
monitor and attach the clip end of the safety key to your clothing (ie: waistband). If you should
slip or fall while exercising the safety key will pull out of the console, shutting off the treadmill.
Getting started
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood.
WINDOW DISPLAY
Speed
: Displays the current speed from starting at 0.5 mph to 10 mph
Time
:
Displays your elapsed workout time in minutes up to 99:59.
Counts down from your preset target time to 0:00 during your workout.
Distance
: Displays the distance traveled in miles.
Calories
: Displays the cumulative calories burned at any given time during your
Workout.
Note
: This is a rough guide used for comparison of different exercise
sessions, which cannot be used for medical purposes
.
Pulse
: Displays the user’s current heart rate in beats per minutes during the
workout. To display your heart rate, you must hold both handrails.
Note:
This is a rough guide used for comparison of different exercise
sessions, which
cannot be used for medical purposes.
Incline
: Displays the incline level during your workout from 0 to 10.
Program
:
Displays the program selected.
