background image

20

TR6.65 Treadmill

The Heart Rate Programs use your treadmill’s incline system to adjust your heart rate. Increases and decreases 

in elevation affect heart rate much more efficiently than changes in speed. Additionally, changes in incline keep 

you in control of the machine’s speed instead of the machine controlling you.

Selecting A Heart Rate Program

You have the option, during the setup mode, to choose either the Weight Control (HR-1) program or the  

Cardiovascular (HR-2) program. The Weight Control program attempts to maintain your heart rate at 60% of 

your Maximum Heart Rate. The Cardiovascular program attempts to maintain your heart rate at 80% of your 

Maximum Heart Rate. Your Maximum Heart Rate is based upon a formula that subtracts your age from 220. 

Your age input is performed during the setup mode.

CAUTION!

The target value used in HR-1 and HR-2 programs is a suggestion only for normal, healthy 

individuals.

 Do not exceed your limits!

 You may not be able to obtain your chosen target. If 

in question, enter a higher age value that will set a lower target goal.

1.  Press the HR1/HR2 key to select the HR1 or HR2 program. Pressing the key once will 

show the HR1 program; pressing twice will show the HR2 program.

2.  The Display will now be blinking showing the default age value (35). Adjust and press  

Enter

 or press 

Enter

 to accept the default. 

3.  The Display will now be blinking showing the default bodyweight value (150).  

Adjust and press 

Enter

 or press 

Enter

 to accept the default.

4.  The Display will now be blinking the default time value (30:00). Adjust the time and press 

Enter

.

5.  The Display will be blinking, showing the default HR for this program. You may  

adjust it and press 

Enter

 if you want or just press 

Enter

 to accept the default value.

6.  Press 

Start

 to begin program. 

** Remember that you must maintain contact with the sensors or wear the chest strap for the 

program to work.

Heart Rate Program Operation

NOTE:

 It is recommended that you use the telemetric chest strap to achieve the best results 

with the heart rate programs.

Summary of Contents for TR6.65

































Reviews: