background image

1

Record Your Serial Number

Please record the serial number of this fitness product 

in the space provided below.

Serial Number

Register Your Purchase

The self-addressed product registration card must be completed in full and returned to XTERRA  

Fitness. You can also go to https://www.xterrafitness.com/support/warrantyreg/ 

to register online.

Thank you for your purchase of this quality treadmill from XTERRA Fitness. Your new

treadmill has been manufactured by one of the leading fitness manufacturers in the world

and is backed by one of the most comprehensive warranties available. XTERRA Fitness will

do all we can to make your ownership experience as pleasant as possible for many years

to come. If you have questions, or if parts are missing or damaged, or you require customer

service, call (870) 336-4286. Please have your model number and serial number handy when

you call.

Please take a moment to record where you purchased your machine, as well as the date of

purchase for future reference. We appreciate your confidence in XTERRA Fitness and we

will always remember that you are the reason that we are in business. Please complete and

mail your registration card today and enjoy your new treadmill.

Yours in Health,

XTERRA Fitness

Congratulations on your new treadmill and welcome to the XTERRA Fitness family!

Purchase Location
Purchase Date

TR700_20160407

Pr
oduct R

egistr

ation

SERIAL NUMBER

(870) 336-4286 

Summary of Contents for TR700





































Reviews: