background image

TR3.0 Treadmill

17

The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of  

exercising comfortably. A great deal of this success has been promoted by the use of heart rate 

monitors. With the proper use of a heart rate monitor, many people find that their usual choice of 

exercise intensity was either too high or too low and exercise is much more enjoyable by

maintaining their heart rate in the desired benefit range.

To determine the benefit range in which you wish to train, you must first determine your predicted  

Maximum Heart Rate. This can be accomplished by using the following formula: 220 minus your 

age. This will give you the predicted Maximum Heart Rate (MHR) for someone of your age. To de-

termine the effective heart rate range for specific goals you simply calculate a percentage of your 

MHR. Your heart rate training zone is 50% to 90% of your maximum heart rate. Training at 60% of 

your maximum heart rate is recommended for burning fat, while training at 80% of your maximum 

heart rate is recommended for strengthening your cardiovascular system. 

For someone who is 40 years old their

predicted target heart rate zone is calculated:

220 – 40 = 180 (maximum heart rate)

180 x .6 = 108 beats per minute  

 

(60% of maximum)

180 X .8 = 144 beats per minute  

 

(80% of maximum)

So for a 40 year old the training zone would be 

108 to 144 beats per minute.

After calculating your MHR you can decide upon 

which goal you would like to pursue.

The two most popular reasons for exercise are 

cardiovascular fitness (training for the heart and lungs) and weight control. The black columns on 

the chart above represent the MHR for a person whose age is listed at the bottom of each column. 

The training heart rate, for either cardiovascular fitness or weight loss, is represented by two lines 

that cut diagonally through the chart. A definition of the lines’ goal is in the bottom left-hand cor-

ner of the chart. Whether your goal is weight loss or cardiovascular fitness, it can be achieved by 

training between 60% and 80% of your MHR. Consult your physician before participating in any 

exercise program. 

Heart Rate 

Summary of Contents for Trail Racer TR3.0





























Reviews: