10
TRX2500 Treadmill
Quick Start Operation
Pause / Stop / Reset
Incline Features
Pulse Grip Feature
Calorie Display
Functions
1. Attach the Safety Key to enable the display (if not already on).
2. Press the Start/Stop key to begin belt movement. Adjust to the desired speed using the
speed ▲ and ▼ keys (console or handgrip). You may also use the Quick Speed Keys 1 -
10 to adjust the speed.
3. To adjust deck incline, press the ▲/▼ incline key (console or handgip) to the desired
incline level. You may also press the Quick Incline Keys 0 - 10 to adjust.
4. To stop the treadmill, press Start/Stop Key or pull out the Safety Key, though we
encourage you to use the Start/Stop Key.
1. When the treadmill is running, the pause feature may be utilized by pressing the Start/
Stop key once. This will slowly decelerate the tread-belt to a stop. The incline will go to
zero percent. The Time, Distance and Calorie readings will also stop.
2. To resume your workout, press the Start/Stop key. The speed and incline will return to
their previous settings.
3. If the ENTER key is pressed while paused, the console will reset and return to the idle
mode (start up) screen.
1. Incline may be adjusted anytime after the belt begins to move.
2. Press and hold the Adjust incline ▲/▼ keys on the left side (console or handgrip) to
achieve your desired incline. You may also choose a more rapid increase / decrease by
selecting a Quick Incline Key 0 - 10 on left hand side of console (incline).
3. The display will indicate incline position as adjustments are made.
The Pulse (Heart Rate) readout will display your current heart rate in beats per minute during
the workout. You must use both stainless steel sensors on the handlebar to display your
pulse. Pulse value displays anytime the upper display is receiving a pulse signal.
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions,
which cannot be used for medical purposes.