Model
XE570S
Service
Replacing Parts
Parts
11 Sliding Wheels
Rev.
Procedures：
1.
Use Phillips head screwdriver to
release M5x15mm Phillips head screw
to take off Slide Wheel Cover, as
shown in figure 1.
2.
Use C-ring Pliers to release ψ 17
C-ring and the Sliding Wheels can be
released, as shown in figure 2 and 3.
3.
To resume, apply some lubricant on
the wheel shaft and return oneψ17
wave washer, sliding wheels and
another ψ 17 wave washer in
sequence and secure with C-ring then
return the wheel cover.
1
2
3
