accidentally.
5.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in
the hands of untrained users.
6.
Maintain tools with care. Keep the cutting tools sharp and clean. Properly maintained tools
with sharp cutting edges are less likely to bind and are easier to control.
7.
Check for misalignment or binding of moving parts, breakage of parts and any other condition
that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
8.
Use only accessories that are recommended by the manufacturer for your model. Accessories
that may be suitable for one tool, may become hazardous when used on another tool.
Service
1.
Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
2.
When servicing a tool, use only identical replacement parts. Follow instructions in the
maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.
Make sure that the foreign objects such as nails and screws have been removed from the work
before commencing sanding.
2.
Rags,cloths,cord,string and the likeshould never be left around the work area.
3.
Always switch off before the sander is put down.
4.
Do not force the sander.Let the tool work at a reasonable speed.Overloading will occur if too
much pressure is applied and the motor slows resulting in inefficient
sanding and may damage the sander motor.
5.
When an extension cable is required,be sure that it has the right ampere rating for the tool and
is in safe electrical condition.
6.
Fully unwind cable drum extension to avoid potential overheating.
7.
Do not touch the moving sanding belt.
8.
Worn,torn or heavily clogged sanding belts can not be continuely use.
9.
Always connect the dust bag or use dust extraction system when sanding wood.
ASSEMBLY
Fitting The Dust Collection Bag
This machine is fitted with a dust extraction outlet and collection bag. We recommend that this facility
is used at all times, as well as using an approved face mask. Fit the dust collection bag onto the dust
extraction outlet
Switching on and off
Connect the plug to the power supply.To start the machine ,squeeze the ON/OFF trigger switch;To
stop the machine, release the ON/OFF trigger switch
WARNING! The sander is designed for dry sanding only and under no circumstances should it be
used for wet sanding
