Switch
WARNING: Before installing the battery car- tridge
into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF"
position when released.
WARNING: NEVER defeat the lock-off button by
taping down or some other means. A switch with a
negated lock-off button may result in unintentional
operation and serious personal injury.
WARNING: NEVER use the tool if it runs when you
simply pull the switch trigger without press- ing the
lock-off button. A switch in need of repair may result
in unintentional operation and serious personal
injury. Return tool to a Liangye service center for
proper repairs BEFORE further usage.
To prevent the switch trigger from being accidentally
pulled, a lock- off button is provided. To start the
tool, depress the lock-off button and pull the switch
trigger. Tool speed is increased by increasing
pressure on the switch trigger.Release the switch
trigger to stop.
1
2
1. Switch trigger
2. Lock-off button
NOTICE: Do not pull the switch trigger hard without pressing in the lock-off button. This
can cause switch breakage.
Foot
After a cutting operation, raise the backside of the
tool and a foot comes under the level of the rear
base. This prevents the planer blades to be
damaged.
1. Planer blade
2. Rear base
3. Foot
3
2
1
ASSEMBLY
CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed
before carrying out any work on the tool.
Wrench
When not in use, store the wrench
by inserting it directly into the
storage hole on the tool body as
shown in the figure as far as it can
go to keep it from being lost.
1
2
1. Wrench
2. Storage hole
