Hold the trimmer with both hands and pull the switch handle and hand button and then move it in
front of your body.
As a basic operation, tilt the blades towards the trimming direction and move it calmly.
To cut a hedge top evenly, it helps to tie a string at the desired hedge height and to trim along it, using
it as a reference line.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the battery packs are removed before attempting to
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may
result.
Cleaning the tool
Clean out the tool by wiping off dust with a dry or soap dipped rag.
Blade maintenance
Smear the blade before and once per hour during operation using machine oil or similar. NOTE:
After operation, remove dust from both sides of the blade with wired brush, wipe it off with a rag and
then apply enough low-viscosity oil, such as machine oil etc. and spray-type lubricating oil.
CAUTION:
Do not wash the blades in water. Failure to do so may cause rust or damage on the tool.
