8
Need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.net
❑
With the both the transmitter and the truck turned on, rotate the
transmitter's steering wheel forward (to the right). The front wheels
on the truck should turn right.
☞
If they don't, flip the steering servo reversing switch on the
top of the transmitter to change the direction.
❑
Rotate the transmitter's steering wheel backward (to the left). The
front wheels on the truck should turn left. Let go of the steering
wheel. The truck's wheels should return to center.
☞
If the wheels do not point straight ahead (center) after you
return the steering wheel to center, move the steering trim lever on
the transmitter to adjust the wheels so that they point straight ahead.
❑
While holding the chassis off the ground, pull back on the throttle
trigger. The rear wheels should spin counter-clockwise as shown.
☞
If the wheels don't spin counter-clockwise when you pull back
on the trigger, flip the throttle servo reversing switch on the top of
the transmitter to change the direction.
❑
Release the trigger and the wheels should stop spinning.
Checking the Steering Controls
Checking the Throttle Controls
