Page 21
n
Quick Break Down Guide, Continued....
2: removing the motor and centre differential Assembly
mAINTENANCE AND qUICK bREAK DOWN GUIDE
Remove the two 4 x 12mm self-tapping screws and the
two 4 x 10mm machine screws that secure the motor
and centre differential assembly in place.
Pull the motor and centre differential up and out of the
chassis.
Unplug the motors wires from the ESC,
then unplug the two motor heat-sink
fans from the Y-Harness adapter.
Unplug the throttle channel lead from
the receiver, then pull it out from below
the motor heat-sink fans.
A
B
C
Continued On Next Page