5
Need help or have any questions? Call us at 1-714-963-0329 or send us an Email at service@globalhobby.net
Air Filter:
The air filter is made of foam and prevents dirt and debris from entering the engine through the carburetor.
Battery Box:
This is where the receiver battery is mounted. The battery box protects the battery from dust, dirt and oil.
Body Mount:
Made of high-impact plastic for strength, the body mount secures the Lexan body into place. There is one body mount assembly on the
front of the chassis and one on the back of the chassis.
Engine:
The X-Cellerator Nitro Stadium Racer includes the powerful XTM Racing .18 engine with pull-starter for ease of use and great performance.
Fuel Tank:
The fuel tank holds the fuel that your engine uses. This fuel tank includes a fuel pressure nipple that connects to the tuned pipe to
pressurize the fuel system and also features a quick-flip type lid for fast refueling.
On/Off Switch:
Turns the receiver on and off. The on/off switch is protected from dust, dirt and oil by a silicone cover.
Pull-Starter:
Used to start the engine in place of an electric starter.
Receiver Box:
This is where the receiver is mounted. The receiver box protects the receiver from dust, dirt and oil.
Shock Assembly:
The shocks are oil-filled and use a spring that is well suited for most off-road conditions. The shocks feature threaded shock
bodies that allow the shocks to be easily tuned for different driving conditions.
Steering Servo:
This servo controls the vehicle's steering. A "servo saver" is used to help prevent the servo gears from being stripped out.
Steering Tie-Rod:
The tie-rod connects the steering linkage and the castor block. The tie-rods are adjustable so you can make toe-angle
adjustments to the front wheels.
Throttle/Brake Servo:
This servo controls both the engine's throttle and the vehicle's brake.
Tuned Pipe:
The tuned pipe is an expansion muffler that greatly increases the power output of the engine.
Wheel/Tire Assembly:
The X-Cellerator Nitro Stadium Racer includes molded rubber tires with a tread pattern that is good for most off-road
applications. The wheels are molded in one piece from high-impact plastic for strength
