75
5.8 GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you
need to use the gearbox matching function to re-match the
engine and the gearbox.
Before resetting the gearbox, please check the gearbox control unit to
ensure that there is no fault code. If there is a fault code, the gearbox memory
function cannot be reset. Please road test after reset.
The operation guidelines of the Gearbox Matching function
are shown as below:
1.
Enter the
Gearbox matching
menu and choose relevant
models according to the vehicle being tested.
2.
Enter the
Reset adaptive value
menu.
3.
Turn on the ignition without starting the engine.
4.
Read the note and press
OK
to continue the Gearbox
Matching function.
