49
6. Enter the
10-digit battery serial number
and press
OK
after the
input.
Figure 5-19 Sample of BMS function (screen 3)
5.6 THROTTLE
Throttle Position Sensor (TPS) Match, this function enables you to
make initial settings to throttle actuators and returns the “learned”
values stored on ECU to the default state. Doing so can accurately
control the actions of regulating throttle (or idle engine) to adjust the
amount of air intake.
The operation guidelines of the Throttle function are shown as
below:
1. Enter the
Throttle
menu and choose relevant models according to
the vehicle being tested.
2. Enter the
Auto Recognition
menu and turn on the ignition switch.
3. Read carefully and complete the
requisites
listed before
performing the throttle regeneration function. And press
OK
after
completing the instructions shown.
