8
4
Switch on the ignition and tap on the Diagnostic application to start processing.
The connection method is shown in the figure below:
1.
Vehicle
2. VCI box
3. USB
Cable
4. Tablet
⚠
Note: 1. Please make sure all the cables are connected tightly; The vehicle’s DLC is not always located
under the dash; for the location of the DLC, please refer to the vehicle’s user manual.
2. We suggest using wired connection when working on processes which require large and stable
data flow (like programming modules). Please refer to the actual prompts shown on device when
processing.
3. When checking or programming TPMS sensors, VCI connection is unnecessary.
Precautions when processing
1. The voltage range on the car: +9~+18V DC;
2. When testing some special functions, the operator must operate according to the prompts and meet the test conditions.
For some models [special functions], the conditions that need to be met are: engine water temperature 80
℃
~105
℃
, turn
off headlights and air conditioners, keep the accelerator pedal in the released position, etc.;
3. The electronic control systems of different models are very complicated. If you encounter situations where it is
impossible to test or a large amount of test data is abnormal, you can search for the ECU of the vehicle and select the
menu for the model on the ECU nameplate;
4. If the vehicle type or electronic control system to be tested is not found in the diagnostic function, please upgrade the
vehicle diagnostic software to the latest version using the Updates menu or consult the XTOOL technical service
department;
5. Only wiring harnesses provided by XTOOL and designed for the scan tool are permitted to be used with this scan tool to
avoid damage to the vehicle or the scan tool;
6. When running a Diagnostics function, it is forbidden to shut down the scan tool directly. You should cancel the task
before returning to the main interface and then shutting down the scan tool.
3. TPMS M
ODIFICATIONS
By clicking “TPMS” button on the main menu, IP819TP allows you to diagnosis the TPMS (Tire-Pressure Monitoring
System) of the vehicle, as well as activating (checking) the tire pressure sensor, searching for OEM tire sensor info,
relearn sensors, program XTool universal TPMS sensors, and perform special functions inside TPMS (available soon).
BEGINNING TPMS DIAGNOSIS
When doing TPMS activation/relearn/sensor programming, VCI connection is unnecessary. For diagnosis/special
functions, please make sure the VCI box is connected to the OBD port.
Summary of Contents for IP819TP
Page 65: ...63...
