X100PAD Elite Diagnosis System
8
1
X100PAD Elite Tablet
2
Main cable
③
OBDII-16 Adapter (Select other adapters if needed)
④
Measured vehicle
3.2. Precautions before Use
3.2.1.
The vehicle power supply has to meet the normal voltage limits DC 9-15V
3.2.2.
Users should check the position of the DLC port and ensure the OBDII 16pin
connector and the DLC port are correctly aligned before attempting to connect.
3.2.3.
When taking some special functions tests, users are required to operate the
device according to operating instructions. For vehicle, it has to strictly meet the
requirements, for example, the conditions that some vehicle models need to be
Reached are as follows: engine temperature 80
℃
/105
℃
, turn off the loads (such as
Headlights, air-conditioner, etc.), put accelerator pedal in released position, etc.
3.2.4.
If users cann ot find the tested vehicle model or electronic control system in
the X100PAD Elite test menu, they may need to update the software or consult Xtool
technical service department.
3.2.5.
Please ensure that only official XTOOL cables and connectors are used to
prevent damage to the unit.
3.2.6.
Before powering off the unit, please ensure that you cancel or complete the
current task or function and return to the main interface, then power off.
3.2.7.
Do not use excessive force to operate the touch screen.
3.2.8.
During long period of non-use, please disconnect the power and turn off the
X100PAD Elite unit.
