11
PLEASE NOTE: Different vehicles have different menus and systems.
Common main function menu includes the following options:
Read ECU:
This function is to read the ECU version information, which is the
equivalent of
“
System Identification
”
or
“
System Information
”
in some electronic
control systems.
This will allow you to read ECU related software and hardware versions, models and
production date of diesel engine, part number, etc.
Read DTCs:
read the trouble codes that are stored in the ECU.
Clear DTCs:
clear current and historical trouble codes memory in ECU. The trouble
codes cannot be erased without eliminating the fault that the code relates to. TIP:
Save or print the currently stored fault codes before clearing them to provide help in
the case of an intermittent fault.
4.2.2.
Toolbar function buttons descriptions
Function Buttons Descriptions
Return to previous interface
Print test data
Click to record the data, click again to send your
feedback to XTOOL service center
After clicking the data record button the second time the data feedback page will
appear as shown below, showing diagnostic software version, vehicle being tested,
and the steps performed in the diagnostic process. Users can then enter the nature
of the problem and any other relevant information and send the form to the Xtool
engineering department.
