Chapter 2
Embroidery Guide
Owner’s
Manual of BECS- A15 Computerized Control System
17
V.
Manual Operation
1.
Manual Thread-trimming:
When the machine stops, press
in the main interface to display a
hint window, where user can press
“Trim
Upper&Bobbin
Thread”
to trim
threads, or click
“Trim
Bobbin
Thread”
to trim the bobbin thread only. Press
to
quit the thread-trimming operation.
2.
Manual Frame-Moving:
When the machine stops, press direction keys (
,
,
to move frame along the corresponding direction. Press the two neighboring keys
at the same time to move the frame in the direction of the angle bisector.
is the speed key for manual frame-moving. Press to shift between
(high speed) and
(low speed).
3.
Clear the Frame Coordinates
When the machine stops, press
to clear the XY displacements
displayed in the main interface. The function can be used with manual frame-
moving.
4.
Manual Color-Changing
When the machine stops, press
in the main interface to enter manual
color-changing interface. Then click the needle number for color-changing, and
the machine head will automatically move to the corresponding needle position.
Please note: if the user wants to automatically save the order of the
manual color-changing, user should operate it in the manual color-changing
interface on the
,
)
