C
hapter 4
Common Parameters
and Color-Changing Order
34
Owner’s
Manual of BECS- A15 Computerized Control System
No.
Icon
Name
Description
3
Color Lump Number
List
Display the number of the color lumps
of the pattern
Needle Bar Number
and Color
Display the needle bar number and
thread color of each corresponding
color lump
Move Up
Move upward the color-changing list to
select the color lump for setting
Insert
Needle
Bar
Number
Click this key and a needle number to
insert it in the current list of needle list.
Delete Needle Bar
Number
Delete the needle number of the current
operation position in the needle list.
Move Down
Move downward the color-changing
list to select the color lump for setting
4
Color Selection Area
Select the color for the needle bar
number to be set
5
Return
Return to the previous operation
interface
Repetition
Repeat color-changing order
Patch Embroidery
Set the patch embroidery of the pattern
Set Needle Bar Color
Select default colors to set the color of
each needle bar
Pattern Preview
Load the selected pattern, check the
pattern data and create the pattern icon
Next
Enter the next operation iterface
The pattern display area displays the pattern under color-changing setting. After
changing the color-changing order, the display will be renewed at same time to show the
modification effect.
Color-changing order display area shows color lump numbers, needle bar numbers and
needle bar colors.
Pattern display can be in parallel with the setting, insertion and deletion of needle bar
number, which means that users can set and change the color-changing order along with
the display.
