Chapter 7
Letter Pattern Operation
Owner’s
Manual of BECS- A15 Computerized Control System
59
“Actual”:
show the letter pattern in the actual size. At this time, the size of pattern
in interface is equal to actual size.
“Center”:
scale up/down the view, so as to show the whole pattern for
checking.
“Save”:
it is used for saving the edited letter pattern. After
pressing this key, the
system will display the window for user to input the pattern number and name. According
to need, change the pattern name and number (the number is not recommended to be
changed), then press confirmation key to start saving.
“Exit”:
quit from
“Create
Letter Pattern”.
4.
Keys for Adjusting Whole Arrangement
If you adjust the parameters for whole rank after the edition of the individual letter, the
edition of the individual letter will be probably replaced.
“Horizontal”:
rank the letters horizontally
Press this key to shift among “horizontal”, “vertical”, “up arc”, and “down arc”. Only
in
case of “up arc” and “down arc” can “fix letter direction”, “increase radian” and
“decrease
radian”
be adjusted.
“Vertical”:
rank letters vertically
“Up
Arc”:
rank letters in arc bending upwards
“Down
Arc”:
rank letters in arc bending downwards
“Fix
Letter
Direction”:
when user ranks the letters in arc, the letter angle will not
