Chapter 9
Other Functions
70
Owner’s
Manual of BECS- A15 Computerized Control System
Debugging Interface 1
Debugging Interface 2
Driver Parameter Test
X-axis parameter test
Y-axis parameter test
Main shaft parameter test
Save driver parameters
Load driver parameters
Sensor Status Test
Test pull bar switch, frame limit, knife
origin, knife maximum point, thread-
hooking origin, and needle
position display, etc.
Peripheral board
Management
Peripheral board upgrade
Boot Loader Upgrade
Auto Find Origin
Others
External CAN communication test
External communication test
Touch screen correction
Parameters Export/Import
Import machine parameters
Export machine parameters
Parameter Initialization
9.6
Date and Time
In date and time interface, user can check and modify the date and time of the system.
9.7
Touch Screen Correction
After using for a period, the touch screen may probably have the problem of the
inaccurate operation. This problem can be resolved by touch screen correction. During the
correction, please touch the very center of the cross displayed on the screen, or it may
affect the future operation. In order to avoid the trouble caused by the inaccurate correction,
this operation is only for the person with authorization.
1.
Press
to enter the interface for other functions.
2.
Press
to enter debugging interface, where user can select
“Other” to enter
