KickBack Installation
s
tep 19
Refer to Kickback instructional
manual.
19
s
tep 20
20a
Install The Front Light
Remove the black nut and bolt holding the light to its bracket. Note that the nut will fit into a hexagonal pocket
on one side of the bracket, so you won’t need to hold it by hand/wrench.
Hold the back of the light and pull forwards on the clear plastic tab to remove the light’s cover.
Install the provided batteries, then reinstall the bracket with the black bolt and nut.
(Skip to step 21 if your model didn’t come with a front light)
Summary of Contents for EdgeRunner Classic
Page 1: ...EdgeRunner Swoop C lassic A SSEMBLY M ANUAL Rev 1A ...
Page 17: ......
