Install the Fork
s
tep 4
Find the headset and spacers in the included small
parts box, and the S/M/L sized stem (paired with
seatpost) in the separately-shipped accessory box.
4A
The headset includes a thin rubber seal that sits on the
lip of the crown race. Install this first, then the lower
bearing (the lower bearing is larger than the upper).
Grease liberally.
4B
Slide the steerer tube up through the headtube,
taking care to make sure the hoses and housing are
routed correctly.
4C
Pro tip:
Zip-tie or toe-strap the fork to the
down-tube to assist during stem/headset assem-
bly.
Note:
The cable housing and hoses are routed
past the head tube on the same side as they
come up the down tube - don’t cross them under
the downtube!
*
Summary of Contents for EdgeRunner Swoop
Page 1: ...EdgeRunner Swoop C lassic A SSEMBLY M ANUAL Rev 1A...
Page 17: ......
